Multi-layer packaging meets requirements for the recyclability of packaging according to the Packaging and Packaging Waste Regulation (PPWR)
Collaboration project gives proof of concept for closed recycling loop for PET-based multi-layer packaging. (Credit: BASF SE)
Multi-layer films are used for a wide range of packaging materials, particularly in the food industry. The European Green Deal stipulates that packaging must be recyclable to a large extent by 2030. In the future, the details will be regulated by the Packaging and Packaging Waste Regulation (PPWR). A draft regulation was presented in November 2022. However, up until this point, the recycling of multi-layer film has proven difficult because the film is made of different materials.
A collaboration project involving the companies BASF, Krones, SÜDPACK, and TOMRA has now demonstrated that it is possible to separate PET/PE multi-layer packaging into its individual components and return them to the materials cycle as raw materials. During the first industrial trial conducted at a Krones pilot plant in Flensburg, the partners were able to completely separate as much as 69 percent of the PET/PE components and partially separate another twelve percent. This approach is special as it uses the existing infrastructure only to recycle the multi-layer packaging.
The first phase of the project was initiated in early 2021 when TOMRA conducted the first sorting trials with PET/PE trays. These trays had been manufactured by SÜDPACK using a “debonding adhesive” developed by BASF. SÜDPACK, a leading manufacturer of high-performance films for the packaging of food, non-food and medical products, has committed to becoming a zero-waste company. “Our contribution to the collaboration project was our long-standing expertise in lamination. Using our expert know-how in water-based lamination, we were able to develop multi-layer films that can be separated by caustic hot washing,” says Carolin Grimbacher, Managing Partner at SÜDPACK who is also responsible for R&D.
Krones, a company that, among other things, develops plastics recycling systems, joined the project team in July 2022. At one of the company’s pilot plants, trials were carried out to test whether it’s possible to separate laminated PET/PE films to their single layers in an industrial scale. A standard hot washing process commonly used for PET recycling was applied sucessfully and as a result, the separated PET and PE can be re-used as monomaterials. “At our facility, we proved that the delamination of multi-layer films works. However, the separation of the films can still be improved by optimizing individual process parameters as well as, for example, the particle size of the flakes,” Thore Lucks, Head of Techology Recycling Solutions at Krones, explains.
The process of separating the PET and PE components of the film is based on adhesives that were specifically developed for this purpose. These adhesives are used during the lamination of multi-layer films to join different functional materials. The lamination adhesive must have the best possible adhesive strength when required, but still makes it possible to easily separate the two films when it comes time to recycle. “Our water-based Epotal adhesives already yielded very good results when separating multi-layer packaging in the laboratory. We consider it a huge success that we were able to completely separate 69 percent of the packaging during our very first industrial trial. We are confident that we will be able to further increase this figure by optimizing our debonding adhesive,” Kresimir Cule, Commercial Marketing Industrial Adhesives, BASF SE, states.
Source: Company Press Release